 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. www..com Signal Isolated Amplifier IC ISO-U(A)PO: DC V/I Signal Isolated Amplifier IC (Photoelectricity Isolation) General characteristic: Low cost,small size,SIP 12 anti- fire UL94V-0 package Can adjust "Zero"and "Gain" Three-port (power/input/output) isolation:3000VDC Assistant power:5VDC/12VDC/15VDC/24VDC 0-5V/0-10V/0-100mV/voltage signal or 0-10mA/0-20mA/4-20mA/ current signal isolation and transfer Temperature range: -45~+85 with good anti-jamming EMC and high frequency signal capability Applications DC current/voltage signal isolated/transfer/amplifier No distortion in long distance signal transmission Analog signal data acquisition 4-20mA(0-20mA)/0-5V signal isolation and transfer Equipment and sensor signal acquisition Signal transmit no-distortion Electric power,distant control,isolated safe bar 4-20mA sensor analog signal transmission Ground interference control Specification: ISO series DC voltage isolated amplifier is a kind of IC that can convert DC voltage to output current or voltage that according to comparison with no relationship with load. It's widely used in Electric power, distant control, instrument, medical instrument, and industrial control industries. This photoelectricity isolation is with good anti-jamming capability Efficiency grade0.1, 0.2, 0.5 ,0-10mA/0-20mA/4-20mA isolated signal of international standard signal input and output.Output voltage signal: 0-5V/0-10V/1-5V;Output current signal0-10mA/0-20mA/4-20mA.With high load capability. in whole process (nonlinearity<2%). Extremely high linearity Part number and description: ISO- U(A) - P -O Input signal U1:0-5V U2:0-10V U3:0-75mV U4:0-2.5V U5: User-defined A1:0-1mA A2:0-10mA A3:0-20mA A4:4-20mA A5: User-defined Accessorial power supply P P1:DC24V P2:DC12V P3: DC5V P4:DC15V P5: User-defined Output O1:4-20mA O2:0~20mA O3:4-12-20mA O4:0~5V O5:0~10V O6:1~5V O7:User-defined SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. www..com Signal Isolated Amplifier IC Example: Example 1: Input 0-5V ; power supply:24VDC ,Output 4-20mA Part number: ISO-U1-P1-O1 2.Input:4-20mA, power supply:24VDC,Output:4-20mA Part Nomber:ISO-A4-P1-O1 General parameter: Parameter Isolated voltage G.Adj G.Adj temperature drift Non-linearity Input signal Voltage Current Voltage Current Voltage Current Voltage Current -3DB No-filter Voltage Power loss -45 -55 User-defined 3.3 Vout=10V 0 0 0 2 350 200 10 12 0.5 20 0.2 24 1 85 105 0 0 2 0.3 1 250 10 20 * * Test Condition 1min Mix 3000 1 100 0.1 0.2 50 30 5 Type Max Unit V(rms) V/V ppm/ %FSR V mA mV M V mA k Hz mVRMS mV/ VDC W Input maladjusted voltage Input impedance Output signal Load capability Frequency response Signal output ripple Signal voltage temperature drift Assistant power Operating temperature Storage temperature Iutput parameter: Input item 0~1mA 0~10mA 0~20mA 4-20mA Voltage signal User-defined 1M User-defined 2.0 times of rated:Continuous User-defined Input impedance 1K 250 ohm(if need other impedance,such as 100 ohm,pls note) Input over load 1.5 times of rated:Continuous 3.0 times of rated: 1S Max operation range: Continue isolation voltage value Power Vin range: Jointing temperature(10sec.) 3000VDC 10%Vin +300 SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. www..com Signal Isolated Amplifier IC Output parameter: Output item 4-20mA 0-20mA 4-12-20mA 0-5V 0-10V 1-5V > 2Kohm 350(If need others,such as 650 ohm,pls note) 1mS Input over load Response time Physical Dimensions and Footprint Description: V1V1 Current signal output V2V1 Voltage signal output V1VI Current output pin description:SIP 12 1 Vin+ 2 GND 3 NO PIN 4 PW+ 5 PW6 NO PIN 7 Io+ 8 NO PIN 9 Adj 10 Adj 11 NO PIN 12 Io- V2VI Voltage output pin description :SIP 12 1 Vin+ 2 GND 3 NO PIN 4 PW+ 5 PW6 NO PIN 7 NO PIN 8 GND1 9 Adj 10 Adj 11 Vo+ 12 NO PIN Note:1.About current output,we do not design PIN 8 and PIN 11,so need not adjust ZERO,you can use it.but if need adjust ZERO,please choose our ISO1002. 2.Abot voltage output,because of high Input impedance,you'd better connect a 1Mresistance and 1uF capacitance. Contact:Candy Yu E-mail:sales02@szsunyuan.com |
Price & Availability of ISO-AX-PX-OX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |